Adventuretech Led Tail Light Kit

I’ve always wanted to upgrade my brake light to an LED kit. I decided to purchase a kit from a company on Vancouver Island, Adventure Tech Ltd.


The wiring appears to go through the circuit board and secured on the opposite side.


You don’t have to remove the seat for access, only remove two screws that secure the lens to the housing. Removing the original bulb was simple by turning and pulling the bulb out of its socket. Installing the LED kit was very straight forward.


The kit includes two grommets; insert the grommets into each end of the circuit board and then mount the circuit board to the tail light screw posts.


Reinstall the lens, ensuring not to pinch the wires between the lens and tail light body.

Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License