Adventure Tech LED Tail Light Kit

I’ve always wanted to upgrade my brake light to an LED kit. I decided to purchase a kit from a company on Vancouver Island, V.I. Adventure Tech Ltd

P5210202-1.jpgP5210203.jpgP5210204.jpg

The wiring appears to go through the circuit board and secured on the opposite side.

P5210207.jpgP5210208.jpg

You don’t have to remove the seat for access, only remove two screws that secure the lens to the housing. Removing the original bulb was simple by turning and pulling the bulb out of its socket. Installing the LED kit was very straight forward.

P5230226.jpgP5230222.jpg

The kit includes two grommets; insert the grommets into each end of the circuit board and then mount the circuit board to the tail light screw posts.

P5230223.jpgP5230224.jpgP5230225.jpg

Reinstall the lens, ensuring not to pinch the wires between the lens and tail light body.

P5230217.jpg
Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License